FIREBIRD GTX\u2122 Optimized Cleaning Solution (GCS) is the quickest and easiest way to perform maintenance on your Brother\u00ae GTX\u2122 printer.* This process typically takes over an hour with other cleaners, but FIREBIRD brings this under twenty minutes. Simply substitute FIREBIRD for your regular cleaner and see the difference right away!<\/p>\n
Compatibility: <\/strong>Brother GTX printers<\/span><\/p>\n Use: <\/strong>Cleaning solution for <\/span>GTX printer maintenance<\/span><\/p>\n Step 1:\u00a0Substitute GCS for your current cleaner.<\/strong><\/p>\n You can expect to use around 50 mL for the entire cleaning. You will also need the tweezers and one \u201cR-Stick\u201d that came with your printer.<\/p>\n Step 2: Begin Maintenance Cycle<\/strong><\/p>\n From the menu on the printer, select Maintenance, then Maintenance Part Clean\/Replace. We also suggest setting a timer for eighteen minutes now to avoid drying out your printheads or wasting ink on a heavy cleaning.<\/p>\n Step 3: Clean Interior of Printer<\/strong><\/p>\n Use a foam swab to soak up some GCS. Use this to gently brush any dried ink away. GCS should break up clogs much more easily than other options, but\u00a0be careful not to swab too hard. DTG printers are delicate and you may damage something expensive. You should also clean the white nozzle guard, exhaust cap, and wipers separately from the same color ink parts.\u00a0The Brother GTX\u2122 will begin a heavy auto-cleaning after twenty minutes during this cycle, so try to close the printer cover\u00a0at the eighteen minute mark. This will save quite a bit on ink by performing a lighter head cleaning.<\/p>\n Step 4: Repeat as necessary<\/strong><\/p>\n While FIREBIRD GCS can let you avoid more than a single cleaning, this may take some practice. In the meantime, make sure to watch the clock to avoid being caught off guard.<\/p>\n *GTX\u2122 is a registered trademark of Brother International Corporation and has not produced, endorsed, warrantied, or approved of this product.<\/p>\n","protected":false},"excerpt":{"rendered":" FIREBIRD GTX\u2122 Optimized Cleaning Solution (GCS) is the quickest and easiest way to perform maintenance on your Brother\u00ae GTX\u2122 printer.* This process typically takes over an hour with other cleaners, […]<\/p>\n